-
2N 9155030 – Infopanel Module
Quick View2N 9155030 – Infopanel Module helps you place such information into the intercom installation as house number, opening hours and similar data. The Infopanel backlight is software controlled.
-
2N 9155041 – Induction Loop Module
Quick View2N 9155041 – Induction Loop Module wirelessly transmits sound from the 2N IP intercom to the affected person’s hearing aid. A hearing impaired visitor to the building thus gets the benefit of voice communication. By installing the induction loop at the door you meet not only the necessary standards, but facilitate the hearing aid wearer’s communication e.g. with the reception desk.
- Audio transmission to hearing aids
- Simple connection to the 2N IP intercom
- Built-in antenna
-
2N 9155084-S – Bluetooth & RFID Reader 125kHz, 13.56MHZ, NFC
Quick View2N 9155084-S – Bluetooth & RFID Reader 125kHz, 13.56MHZ, NFC module for 2N® IP Verso and 2N® LTE Verso combines the currently leading RFID technology with a modern approach to access control based on the Bluetooth technology. Thanks to the multi-frequency RFID reader it reads both, unsecured 125kHz cards and smart 13.56MHz cards. Doors can also be opened with the aid of a smartphone with the installed 2N® Mobile Key application! By tapping the button in the app or by simply touching the reader. Download datasheet.
- Reads majority of access cards on the market
- Open doors using a smartphone
- Mobile credentials for free
-
2N Induction Loop Power Supply
Quick ViewExternal power supply for the induction loop.
- Input 230V AC
- Output 12V DC
-
2N IP Verso / Control 4 DS2 Shroud for Surface Mount Models – Black (C4DS2-OWHB)
Quick View2N IP Verso / Control 4 DS2 Shroud for Surface Mount Models eliminates glare from the overhead sun so that you can see the video feed clearly. It also protects the intercom from UV exposure, dirt, and rain to extend its life and reduce cleaning. The hood is powder-coated to color match the intercom’s color. Carbon steel is weather-resistant and stainless steel provides best the longevity for coastal locations.
Available in Black Carbon Steel or Black Stainless Steel suitable for 2 Module 2N IP Verso & Control 4 DS2 intercoms.
-
2N IP Verso / Control 4 DS2 Shroud for Surface Mount Models – Silver (C4DS2-OWHS)
Quick View2N IP Verso / Control 4 DS2 Shroud for Surface Mount Models eliminates glare from the overhead sun so that you can see the video feed clearly. It also protects the intercom from UV exposure, dirt, and rain to extend its life and reduce cleaning. The hood is powder-coated to color match the intercom’s color. Carbon steel is weather-resistant and stainless steel provides best the longevity for coastal locations.
Available in Silver Carbon Steel or Silver Stainless Steel suitable for 2 Module 2N IP Verso & Control 4 DS2 intercoms
-
2N IP Verso Secure Door Pack
Quick ViewIncrease the security of your doors to the maximum. A useful bundle containing a security relay, tamper switch and I/O module. Read what these accessories offer below.
The security relay is a simple accessory which prevents doors from being opened with a 12V battery. Such a battery allows burglars to open low-power locks if they reach the cables connecting the intercom/reader to the lock. Install the relay between the intercom/reader and the lock. Then pair the security relay with the 2N device. Once set up, the lock will only open if the relay identifies the specific signal sent from the intercom/reader.
The tamper switch is designed to detect intrusion into the intercom’s frame and will activate an alarm if it detects intrusion. What if you also want to prepare more complex scenarios which activate when an intercom is opened without authorization? The I/O module allows you, for example, to set the intercom to take photos and contact the appropriate security agency.
The above components may also be ordered individually – Security relay, Tamper switch and I/O module
-
2N IP Verso Wedge Backplate for 2 modules
Quick View2N IP Verso Wedge Backplate for 2 modules is wall-mounted, and its angle (25°) offers better visual coverage of the area in front of entry door. It is only suitable for surface installation of the double-module versions of the 2N® IP Verso and 2N® LTE Verso intercoms. The dimensions of the part attached to the wall are 114 x 239mm. The dimensions of the area the intercom is attached to are 103 x 234mm.
- Suitable for outdoor use
- Universal – can be used to tilt left or right
- Space for the connection cables
-
2N NVT Phybridge PL-08 multipoint switch with 2 adaptors
Quick ViewIP door communication is the future, but not all buildings have IP cabling. Laying new cables is not the only solution. The existing cabling of old analogue systems can also be used. Simply connect the analogue cables to the switch and the IP products to the adapters. Implement your project quickly, with no costs to replace cables and minimum disturbance to residents.
- IP solutions with analogue cabling
- Triple the range
- Save on costs
-
2N NVT Phybridge PL-08 pack with 6 adaptors
Quick View2N NVT Phybridge PL-08 pack with 6 adaptors are additional adapters for use with the PL-08 Multi-point switch – used to retrofit existing analogue cabling systems to allow the use of IP intercom systems. The system consists of an IP Switch with an adapter interface to connect multiple door stations, access control units, and receiving units over 2-wire. The far end unit connects via cat5 / cat6 to a single adapter connected to the other end of the 2-wire. This item is an additional 6 adapters for the system.
- IP solutions with analogue cabling
- Triple the range
- Fast project completion
- Complement the system with mobile video
-
2N OSDP Module
Quick View2N OSDP Module connects the 2N IP intercom reader to a third-party access control system. The communication between the 2N reader and the controller is via the OSDP protocol, which provides higher security than the Wiegand protocol and encrypts the transmitted data. The
OSDP module is designed primarily for 2N® IP Verso and 2N® IP Style intercoms but can also be used with 2N Access Unit 2.0 smart readers.
For 2N® IP Verso and 2N® LTE Verso intercoms, install the OSDP module under another module (e.g. RFID card reader, Bluetooth reader, keypad). For 2N® IP Style intercoms and Axis 2N Access Unit 2.0 readers, the OSDP module must be placed outside of the device. -
2N Wiegand Isolator
Quick View2N Wiegand Isolator is designed for galvanic isolation of two devices separately power supplied and interconnected via the Wiegand bus. The Wiegand Isolator protects the interconnected devices against communication errors and/or damage.
-
2N-9155035 – 5 Button Module
Quick View2N 9155035 – 5 Button Module comes with 5 mechanical quick dial buttons. The buttons are backlit and can include name tags. Download datasheet.
-
2N-9155048 LTE Verso External Antenna
Quick ViewExternal antenna 9155048 for 2N LTE Verso for installations where internal antenna can’t be used due to an extra module installed or is not able to get a good strength LTE signal.
9155048 2N LTE Verso External Antenna is equipped by 2m long cable to help maximise on the LTE signal.
-
2N-91552N401CB-E 2N LTE Verso 4G Video Intercom – Black
Quick View4G Cellular intercom with Video calling
- Ideal Retrofit Solution with full range of features
- Integrates with various Verso Modules i.e. RFID, Bluetooth, Fingerprint etc.
- Calls to mobiles and tablets using 2N Mobile video app.
- SIP support allows integration with IP Phones / PBX systems
- Supports Picture to email
- Modular System can be easily expanded
- Minimum installation costs
- Access Control Support
The price quoted below is for 2N LTE Verso 9155401C-E, Main unit with camera and includes 9155048 external antenna.
Customising Options – 2N IP Verso LTE includes two module frame with Call Button module mounted leaving an open slot for one optional additional module to be added into the open slot in the frame.
Further modules can also be added if required along with mounting frames, please select the additional module and mounting option by clicking links below.
-
91552N401C-E 2N LTE Verso 4G Video Intercom -Silver
Quick View4G Cellular intercom with Video calling
- Ideal Retrofit Solution with full range of features
- Integrates with various Verso Modules i.e. RFID, Bluetooth, Fingerprint etc.
- Calls to mobiles and tablets using 2N Mobile video app.
- SIP support allows integration with IP Phones / PBX systems
- Supports Picture to email
- Modular System can be easily expanded
- Minimum installation costs
- Access Control Support
The price quoted below is for 2N LTE Verso 9155401C-E, Main unit with camera and includes 9155048 external antenna.
Customising Options – 2N IP Verso LTE includes two module frame with Call Button module mounted leaving an open slot for one optional additional module to be added into the open slot in the frame.
Further modules can also be added if required along with mounting frames, please select the additional module and mounting option by clicking links below.
Showing all 16 results