-
2.4GHz Point to Point Wireless Bridge Kit – Wi-Fi enables wired devices
$224.00Quick ViewHigh Speed Point-to-Point Bridge works as virtual Ethernet cable to Wi-Fi enable any wired Intercom / Camera / Speaker / Phone.
- Forget Ethernet cable, the Ubiquiti NanoStation LOCO is ideal for bridging networks or sharing broadband between buildings
- To install, place the units at either end of the network and connect both to Ethernet cables – for example, connect the first unit into your modem at location one, and connect the second into an Ethernet switch or WiFi access point at the other location
- Face both units so they point towards each other and the link is established. Simple!
- This is a transparent data-link layer bridge, not a routed bridge – this means that you are creating a virtual ethernet cable between the two facilities, making network setup incredibly simple – no routing configuration, all protocols (DHCP, DNS, etc) just work
- Management of the Ubquiti device couldn’t be easier with SSH and SNMP protocol support, as well as a very intuitive HTTP interface.
- Connect two remote locations on the one network
- Share Internet connection between buildings, remote sites, etc.
- Up to 200mW output power, 2×2 MIMO operation, 100Mbps
- Integrated AirOS web software for controlling power, bridge/AP mode, etc.
- Includes POE injector and 240V AC adaptor
- Two units required for wireless Point to Point bridge.
Surge protection should be used for all outdoor installations. Ubiquiti recommend that you use two Ethernet Surge Protectors – model ETH-SP – place one near the NanoStation and the other at the entry point to the building. The ETH-SP will absorb power surges and safely discharge them into the ground.
-
5.8GHz Point to Point Wireless Bridge Kit – Wi-Fi enables wired devices
$296.00Quick ViewHigh Speed Point-to-Point Bridge works as virtual Ethernet cable to Wi-Fi enable any wired Intercom / Camera / Speaker / Phone.
- Forget Ethernet cable, the Ubiquiti NanoStation LOCO is ideal for bridging networks or sharing broadband between buildings
- To install, place the units at either end of the network and connect both to Ethernet cables – for example, connect the first unit into your modem at location one, and connect the second into an Ethernet switch or WiFi access point at the other location
- Face both units so they point towards each other and the link is established. Simple!
- This is a transparent data-link layer bridge, not a routed bridge – this means that you are creating a virtual ethernet cable between the two facilities, making network setup incredibly simple – no routing configuration, all protocols (DHCP, DNS, etc) just work
- Management of the Ubquiti device couldn’t be easier with SSH and SNMP protocol support, as well as a very intuitive HTTP interface.
- Connect two remote locations on the one network
- Share Internet connection between buildings, remote sites, etc.
- Up to 200mW output power, 2×2 MIMO operation, 100Mbps
- Integrated AirOS web software for controlling power, bridge/AP mode, etc.
- Includes POE injector and 240V AC adaptor
- Two units required for wireless Point to Point bridge.
Surge protection should be used for all outdoor installations. Ubiquiti recommend that you use two Ethernet Surge Protectors – model ETH-SP – place one near the NanoStation and the other at the entry point to the building. The ETH-SP will absorb power surges and safely discharge them into the ground.
-
Akuvox E12S Slimline SIP Intercom
Quick View- 2Megapixel Camera,
- Integrated Card Reader,
- Real time 2 way audio,
- Live camera viewing
- Cloud or local based storage
- Rated for outdoor use
- Mobile App compatible
- Can integrated with any SIP device
Please contact us or login for pricing
-
Akuvox E12W SIP Wi-Fi Intercom
Quick ViewAkuvox E12W SIP Wi-Fi Intercom is a trendy unit which is suitable for small /narrow spaces. Akuvox E12W comes with integrated Wi-Fi module enabling quick and easy installation without requirement for cabling. It also supports key-less entry via integrated card reader.
Akuvox E12W SIP Wi-Fi Intercom supports integration with Akuvox range of intercom monitors and Smartplus cloud intercom service.
Please scroll down to Accessories and Related Products to order Rain Cover, RFID Fobs etc.
Best price guaranteed,please contact us for quote
-
Akuvox IT83A 10 inch Android Intercom Monitor, Wi-Fi, Bluetooth.
Quick ViewAndroid slimline touch screen monitor
- Ultra clear, stylish thin profile design
- 10” capacitive touch screen with energy saving mode
- Reception of a HD picture from the door communicator
- Optional Wi-Fi available on IT83W
- Two-way communication with other units in the network, based on SIP v2.0 protocol
- Supports Video Preview – allows you to see your visitor before answering call
- Android 6.0 operating system allows easy integration with 3rd party apps
- Powered by PoE or external source for easy and convenient installation
- Supports US or European electrical wall box mounting
Best price guaranteed,please contact us for quote
-
Doorbird D101S SIP Video intercom, Supports Wi-Fi, PoE, Silver Edition
$745.00Quick ViewThe D101s is the most popular Doorbird in the range. Its silver fascia matches nearly everything, and it features all the benefits of the D10* and D20* range. A fantastic inexpensive way to join the Doorbird revolution of tech doorbells.
You can see your visitors, speak with them and open the door by smartphone or tablet – from anywhere in the world. DoorBird combines innovative technology with elegant design. A smart solution – Designed and manufactured in Germany.
Connects to App on Smartphone or Tablet 180’ – 720p HDTV Camera with Audio Surface Mounted Connect to and Control Electric Door/Gate Connect to leading brand Smartlocks, CCTV, and NAS Devices Connect to ‘Press to Exit’ Button Outside Ready – IP65 Motion Sensor Night Vision WiFi or Ethernet Smart Home Compatible with many platforms Visitor History snapshots with date and time, within app Up to 8 Devices can connect to a Doorbird Up to 10 Doorbird devices can connect to the app -
Doorbird D101W – IP Video intercom, Wi-Fi, PoE, White Edition
$575.00Quick ViewThe D101s is the most popular Doorbird in the range. Its white fascia matches nearly everything, and it features all the benefits of the D10* and D20* range. A fantastic inexpensive way to join the Doorbird revolution of tech doorbells.
You can see your visitors, speak with them and open the door by smartphone or tablet – from anywhere in the world. DoorBird combines innovative technology with elegant design. A smart solution – Designed and manufactured in Germany.
Connects to App on Smartphone or Tablet 180’ – 720p HDTV Camera with Audio Surface Mounted Connect to and Control Electric Door/Gate Connect to leading brand Smartlocks, CCTV, and NAS Devices Connect to ‘Press to Exit’ Button Outside Ready – IP65 Motion Sensor Night Vision WiFi or Ethernet Smart Home Compatible with many platforms Visitor History snapshots with date and time, within app Up to 8 Devices can connect to a Doorbird Up to 10 Doorbird devices can connect to the app -
Doorbird D1101V Video Intercom with Wi-Fi
$950.00 – $1,090.00Quick View- Connection to the network via WiFi or network cable (PoE)
- Full HD camera with 1080 Pixel with Sony Image Sensor
- 4D Motion sensor for additional safety, configurable via the DoorBird App
- Smart Home compatible, e.g. Control4, Loxone and Crestron
Showing all 8 results