2N-914431E SIP Mic Organic, PoE

9156031-13.56 MHz RFID Card Reader for 2N IP Base Intercom9151104CHW- 2N IP Force Intercom with 4 Buttons, HD Camera and 10W speaker

SERVER-LESS PAGING TO UP TO 12 ZONES

2N^® SIP Mic uses a multicast technology and sophisticated controlling mechanism hence enabling communication to up to 12 zones. Moreover, the microphone console- speaker connection is straight forward, no server needed.

TWO-WAY COMMUNICATION

Call from the 2N IP intercoms to the paging console with an inbuilt speaker thanks to SIP protocol.
PRE-RECORDED ANNOUNCEMENTS

Upload or record a message via the microphone and then play it by simple push of a button to a designated zone.

EASY CONFIGURATION

Zones, priorities and announcements prepared in advance can easily be set up in the clean web interface.
INTEGRATION WITH AN AXIS SOLUTION

The 2N^® SIP Mic microphone console is fully integrated into the AXIS Audio Manager central control software. Also, thanks to support for AXIS Vapix^®, announcements can be made using AXIS cameras or speakers.

EASY INSTALLATION WITH A SINGLE CABLE

The 2N^® SIP Mic is very easy to install simply by connecting it to an existing IP network with a PoE cable.
LISTEN-IN FUNCTION

At simple press of a button one can listen to what is happening in certain zone.

SUPPORT FOR IP PBX (SIP)

The 2N^® SIP Mic device may function independently or be simply connected to IP PBX.

Categories: 2N SIP Paging & PA, IP / SIP Mic Consoles Tags: 01208-001, 2N 914431E, 2N SIP Mic, Audio over IP, AX914431E, Axis 01208-001, Axis SIP Mic, School PA System, SIP Paging, SIP Paging Console

Description

2N-914431E SIP Mic Organic SIP based microphone console for paging can appeal not only by wooden designer case, but also by various advanced functions such as broadcasting to 12 zones, two-way communication thanks to an inbuilt speaker, or playing back pre-recorded messages. All these functions are available without the need of server or distance limitations.

Features & Benefits

SERVER-LESS PAGING TO UP TO 12 ZONES

2N-914431E uses a multicast technology and sophisticated controlling mechanism hence enabling communication to up to 12 zones. Moreover, the microphone console- speaker connection is straight forward, no server needed.
TWO-WAY COMMUNICATION

Call from the 2N IP intercoms to the paging console with an inbuilt speaker thanks to SIP protocol.
PRE-RECORDED ANNOUNCEMENTS

Upload or record a message via the microphone and then play it by simple push of a button to a designated zone.
EASY CONFIGURATION

Zones, priorities and announcements prepared in advance can easily be set up in the clean web interface.
INTEGRATION WITH AN AXIS SOLUTION

The 2N^® SIP Mic microphone console is fully integrated into the AXIS Audio Manager central control software. Also, thanks to support for AXIS Vapix^®, announcements can be made using AXIS cameras or speakers.
EASY INSTALLATION WITH A SINGLE CABLE

The 2N^® SIP Mic is very easy to install simply by connecting it to an existing IP network with a PoE cable.
LISTEN-IN FUNCTION

At simple press of a button one can listen to what is happening in certain zone.
SUPPORT FOR IP PBX (SIP)

The 2N^® SIP Mic device may function independently or be simply connected to IP PBX.

2N-914431E Technical Specifications

Audio parameters
Audio stream:	SIP2.0, RTP multicast, VAPIX^®
Audio codecs:	G.711u, G.722, L16
Speakers:	2 build-in, stereo, power output 2x2W, impedance 2×8 Ohm
Interfaces
Logical inputs:	2, galvanically separated, sensitive to contact or voltage from 5 to 48V
Relay output:	1, galvanically isolated, NO and NC contact, max load 48V, 1A
Headphone output:	3.5mm jack, stereo, power output 2x30mW, min. load impedance of 16 Ohm, DR. 101dB, THD+N -85dB
Primary microphone input:	symmetric, XLR, integrated phantom power supply 24V, DR 88dB, THD+N -82dB
Headset microphone input:	3.5mm jack, integrated power supply for electret microphones, DR 84dB, THD+N -78dB
Line input:	3.5mm jack, mono or stereo non-symmetric stereo, DR 93dB, THD+N -82dB

Power supply
External power supply:	12 to 32V, power draw max. 1A
Power over Ethernet:	PoE to 802.3af standard
Mechanical properties
Dimensions:	209 x 65 x 143mm
Operating temperature:	0°C – 40°C
Buttons and labels
Label dimensions:	39.6mm width x 9mm height
Double button:	28mm x 14mm
Single button:	14mm x 14mm
Smal buttons:	9mm x 9mm